BC Coilovers | 2005-2010 - CHEVROLET Cobalt FWD (Also Fits HHR)
SKU: Q-01-BR
This item qualifies for FREE SHIPPING!
No Unexpected Costs - No Customs - No Duties!
BR Series BC Racing Coilover Kit
The BR Series is the perfect choice for street driving, and the occasional road course or autocross duty. With easily accessible adjustment knobs for fine-tuning compression and rebound, ride height adjustment independent of shock stroke, and spring preload, running a performance coilover system has never been easier. The driver chooses how low or high the vehicle sits (no pre-set ride height here!), and BC Racing patented concave lower locking rings will lock it securely in place. Most systems can be upgraded to pillowball mounts to provide the most feedback possible from the suspension and sharpen steering response. BC Racing front camber plates allow a driver to get the perfect alignment setup without compromise. Each of these features is offered, while providing a strong, attractive coilover system at a reasonable price.
- Mono-Tube Shock Design
- Linear Piston And Damping Curve
- Height Adjustment Via Shock Body, Not Spring
- 30-Clicks of Simultaneous Damping Adjustment (Compression/Rebound)
- Custom Spring Rates, Extreme Low, And Swift Springs Available For Most Applications
- Custom Valving And/Or Valving Paired For Custom Spring Rates
- Fully Rebuildable With All Parts Available For Purchase
- Front Camber Plates Standard On Applicable Kits*
- Rear Camber Plates Available For Applicable Kits*
- 2 Year Limited Warranty Against Manufacturers Defect
** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.
SKU: Q-01-BR-SPU
This item qualifies for FREE SHIPPING!
No Unexpected Costs - No Customs - No Duties!
BR Series BC Racing Coilover Kit
The BR Series is the perfect choice for street driving, and the occasional road course or autocross duty. With easily accessible adjustment knobs for fine-tuning compression and rebound, ride height adjustment independent of shock stroke, and spring preload, running a performance coilover system has never been easier. The driver chooses how low or high the vehicle sits (no pre-set ride height here!), and BC Racing patented concave lower locking rings will lock it securely in place. Most systems can be upgraded to pillowball mounts to provide the most feedback possible from the suspension and sharpen steering response. BC Racing front camber plates allow a driver to get the perfect alignment setup without compromise. Each of these features is offered, while providing a strong, attractive coilover system at a reasonable price.
- Mono-Tube Shock Design
- Linear Piston And Damping Curve
- Height Adjustment Via Shock Body, Not Spring
- 30-Clicks of Simultaneous Damping Adjustment (Compression/Rebound)
- Custom Spring Rates, Extreme Low, And Swift Springs Available For Most Applications
- Custom Valving And/Or Valving Paired For Custom Spring Rates
- Fully Rebuildable With All Parts Available For Purchase
- Front Camber Plates Standard On Applicable Kits*
- Rear Camber Plates Available For Applicable Kits*
- 2 Year Limited Warranty Against Manufacturers Defect
** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.
SKU: Q-01-RM
This item qualifies for FREE SHIPPING!
No Unexpected Costs - No Customs - No Duties!
RM Series BC Racing Coilover Kit
BC Racing's inverted RM Series model includes all of the great features of the BR Series model, then takes everything up a notch. The inverted coilover system moves vital damper fluid away from detrimental heat sources to avoid overheating the fluid which can cause damper fade under extreme use. Inverted dampers handle high lateral loads more efficiently and offer increased durability under extended road course sessions. Other advantages are the reduction of unsprung weight by moving the majority of the coilover mass to the chassis of the vehicle where weight can be more easily shaved. This is a durable coilover setup for those looking to attack a road course, hill climb or tarmac rally.
- INVERTED MONO-TUBE SHOCK DESIGN
- HEIGHT ADJUSTMENT VIA SHOCK BODY, NOT SPRING
- 30-CLICKS OF DAMPING ADJUSTMENT (COMPRESSION/REBOUND) SIMULTANEOUSLY
- FRONT CAMBER PLATES STANDARD ON APPLICABLE KITS
- REAR CAMBER PLATES STANDARD ON APPLICABLE KITS
- CUSTOM SPRING RATES AND SWIFT SPRINGS AVAILABLE FOR MOST APPLICATIONS
- CUSTOM VALVING AND/OR VALVING PAIRED FOR CUSTOM SPRING RATES
- 2 YEAR LIMITED WARRANTY AGAINST MANUFACTURER DEFECT
- FULLY REBUILDABLE WITH ALL PARTS AVAILABLE FOR PURCHASE
** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.
SKU: Q-01-RM-SPU
This item qualifies for FREE SHIPPING!
No Unexpected Costs - No Customs - No Duties!
RM Series BC Racing Coilover Kit
BC Racing's inverted RM Series model includes all of the great features of the BR Series model, then takes everything up a notch. The inverted coilover system moves vital damper fluid away from detrimental heat sources to avoid overheating the fluid which can cause damper fade under extreme use. Inverted dampers handle high lateral loads more efficiently and offer increased durability under extended road course sessions. Other advantages are the reduction of unsprung weight by moving the majority of the coilover mass to the chassis of the vehicle where weight can be more easily shaved. This is a durable coilover setup for those looking to attack a road course, hill climb or tarmac rally.
- INVERTED MONO-TUBE SHOCK DESIGN
- HEIGHT ADJUSTMENT VIA SHOCK BODY, NOT SPRING
- 30-CLICKS OF DAMPING ADJUSTMENT (COMPRESSION/REBOUND) SIMULTANEOUSLY
- FRONT CAMBER PLATES STANDARD ON APPLICABLE KITS
- REAR CAMBER PLATES STANDARD ON APPLICABLE KITS
- CUSTOM SPRING RATES AND SWIFT SPRINGS AVAILABLE FOR MOST APPLICATIONS
- CUSTOM VALVING AND/OR VALVING PAIRED FOR CUSTOM SPRING RATES
- 2 YEAR LIMITED WARRANTY AGAINST MANUFACTURER DEFECT
- FULLY REBUILDABLE WITH ALL PARTS AVAILABLE FOR PURCHASE
** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.
Front Spring Rate
62-200-6
Rear Spring Rate
62-160-6-S
Front Swift Spring
62-203-X
Rear Swift Spring
62-152-X