BC Coilovers | 2000-2005 - TOYOTA MR2 Spyder RWD (Fits 135)

SKU: C-18-BR

BR Series BC Racing Coilover Kit

The BR Series is the perfect choice for street driving, and the occasional road course or autocross duty. With easily accessible adjustment knobs for fine-tuning compression and rebound, ride height adjustment independent of shock stroke, and spring preload, running a performance coilover system has never been easier. The driver chooses how low or high the vehicle sits (no pre-set ride height here!), and BC Racing patented concave lower locking rings will lock it securely in place. Most systems can be upgraded to pillowball mounts to provide the most feedback possible from the suspension and sharpen steering response. BC Racing front camber plates allow a driver to get the perfect alignment setup without compromise. Each of these features is offered, while providing a strong, attractive coilover system at a reasonable price.

• Mono-Tube Shock Design
• Linear Piston And Damping Curve
• Height Adjustment Via Shock Body, Not Spring
• 30-Clicks of Simultaneous Damping Adjustment (Compression/Rebound)
• Custom Spring Rates, Extreme Low, And Swift Springs Available For Most Applications
• Custom Valving And/Or Valving Paired For Custom Spring Rates
• Fully Rebuildable With All Parts Available For Purchase
• Front Camber Plates Standard On Applicable Kits*
• Rear Camber Plates Available For Applicable Kits*
• 2 Year Limited Warranty Against Manufacturers Defect

** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.

SKU: C-18-BR-RE

BR Series BC Racing Coilover Kit

The BR Series is the perfect choice for street driving, and the occasional road course or autocross duty. With easily accessible adjustment knobs for fine-tuning compression and rebound, ride height adjustment independent of shock stroke, and spring preload, running a performance coilover system has never been easier. The driver chooses how low or high the vehicle sits (no pre-set ride height here!), and BC Racing patented concave lower locking rings will lock it securely in place. Most systems can be upgraded to pillowball mounts to provide the most feedback possible from the suspension and sharpen steering response. BC Racing front camber plates allow a driver to get the perfect alignment setup without compromise. Each of these features is offered, while providing a strong, attractive coilover system at a reasonable price.

• Mono-Tube Shock Design
• Linear Piston And Damping Curve
• Height Adjustment Via Shock Body, Not Spring
• 30-Clicks of Simultaneous Damping Adjustment (Compression/Rebound)
• Custom Spring Rates, Extreme Low, And Swift Springs Available For Most Applications
• Custom Valving And/Or Valving Paired For Custom Spring Rates
• Fully Rebuildable With All Parts Available For Purchase
• Front Camber Plates Standard On Applicable Kits*
• Rear Camber Plates Available For Applicable Kits*
• 2 Year Limited Warranty Against Manufacturers Defect

** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.

SKU: C-18-BR-SPU

BR Series BC Racing Coilover Kit

The BR Series is the perfect choice for street driving, and the occasional road course or autocross duty. With easily accessible adjustment knobs for fine-tuning compression and rebound, ride height adjustment independent of shock stroke, and spring preload, running a performance coilover system has never been easier. The driver chooses how low or high the vehicle sits (no pre-set ride height here!), and BC Racing patented concave lower locking rings will lock it securely in place. Most systems can be upgraded to pillowball mounts to provide the most feedback possible from the suspension and sharpen steering response. BC Racing front camber plates allow a driver to get the perfect alignment setup without compromise. Each of these features is offered, while providing a strong, attractive coilover system at a reasonable price.

• Mono-Tube Shock Design
• Linear Piston And Damping Curve
• Height Adjustment Via Shock Body, Not Spring
• 30-Clicks of Simultaneous Damping Adjustment (Compression/Rebound)
• Custom Spring Rates, Extreme Low, And Swift Springs Available For Most Applications
• Custom Valving And/Or Valving Paired For Custom Spring Rates
• Fully Rebuildable With All Parts Available For Purchase
• Front Camber Plates Standard On Applicable Kits*
• Rear Camber Plates Available For Applicable Kits*
• 2 Year Limited Warranty Against Manufacturers Defect

** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.

SKU: C-18-BR-SPU-RE

BR Series BC Racing Coilover Kit

The BR Series is the perfect choice for street driving, and the occasional road course or autocross duty. With easily accessible adjustment knobs for fine-tuning compression and rebound, ride height adjustment independent of shock stroke, and spring preload, running a performance coilover system has never been easier. The driver chooses how low or high the vehicle sits (no pre-set ride height here!), and BC Racing patented concave lower locking rings will lock it securely in place. Most systems can be upgraded to pillowball mounts to provide the most feedback possible from the suspension and sharpen steering response. BC Racing front camber plates allow a driver to get the perfect alignment setup without compromise. Each of these features is offered, while providing a strong, attractive coilover system at a reasonable price.

• Mono-Tube Shock Design
• Linear Piston And Damping Curve
• Height Adjustment Via Shock Body, Not Spring
• 30-Clicks of Simultaneous Damping Adjustment (Compression/Rebound)
• Custom Spring Rates, Extreme Low, And Swift Springs Available For Most Applications
• Custom Valving And/Or Valving Paired For Custom Spring Rates
• Fully Rebuildable With All Parts Available For Purchase
• Front Camber Plates Standard On Applicable Kits*
• Rear Camber Plates Available For Applicable Kits*
• 2 Year Limited Warranty Against Manufacturers Defect

** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.

SKU: C-18-DS

DS Series BC Racing Coilover Kit

BC Racing's proprietary digressive piston (DS Series) design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. The biggest advantages of increased low-speed damping force to be in terms of what the driver "feels," i.e., roll, pitch, and quick weight transitions seen in chicanes and on Auto-X courses.

For the ultimate in driver feel - choose BC Racing DR Series Coilovers.

• General Specifications
• MONO-TUBE SHOCK DESIGN
• FULL HEIGHT ADUSTABILITY THROUGH THE SHOCK BODY (NOT SPRING)
• 30 LEVELS OF DAMPING ADJUSTMENT (COMPRESSION/REBOUND)
• FRONT CAMBER PLATES ARE INCLUDED ON ALL APPLICABLE KITS
• REAR CAMBER PLATES INCLUDED ON CERTAIN APPLICATIONS
• CUSTOM SPRING RATES AVAILABLE AS WELL AS A SWIFT SPRING UPGRADE (UPON REQUEST)
• 2 YEAR WARRANTY AGAINST MANUFACTURER DEFECT
• COMPLETELY REBUILDABLE AND INDIVIDUAL PARTS ARE AVAILABLE SEPARATELY FOR PURCHASE

SKU: C-18-DS-RE

DS Series BC Racing Coilover Kit

BC Racing's proprietary digressive piston (DS Series) design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. The biggest advantages of increased low-speed damping force to be in terms of what the driver "feels," i.e., roll, pitch, and quick weight transitions seen in chicanes and on Auto-X courses.

For the ultimate in driver feel - choose BC Racing DR Series Coilovers.

• General Specifications
• MONO-TUBE SHOCK DESIGN
• FULL HEIGHT ADUSTABILITY THROUGH THE SHOCK BODY (NOT SPRING)
• 30 LEVELS OF DAMPING ADJUSTMENT (COMPRESSION/REBOUND)
• FRONT CAMBER PLATES ARE INCLUDED ON ALL APPLICABLE KITS
• REAR CAMBER PLATES INCLUDED ON CERTAIN APPLICATIONS
• CUSTOM SPRING RATES AVAILABLE AS WELL AS A SWIFT SPRING UPGRADE (UPON REQUEST)
• 2 YEAR WARRANTY AGAINST MANUFACTURER DEFECT
• COMPLETELY REBUILDABLE AND INDIVIDUAL PARTS ARE AVAILABLE SEPARATELY FOR PURCHASE

SKU: C-18-DS-SPU

DS Series BC Racing Coilover Kit

BC Racing's proprietary digressive piston (DS Series) design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. The biggest advantages of increased low-speed damping force to be in terms of what the driver "feels," i.e., roll, pitch, and quick weight transitions seen in chicanes and on Auto-X courses.

For the ultimate in driver feel - choose BC Racing DR Series Coilovers.

• General Specifications
• MONO-TUBE SHOCK DESIGN
• FULL HEIGHT ADUSTABILITY THROUGH THE SHOCK BODY (NOT SPRING)
• 30 LEVELS OF DAMPING ADJUSTMENT (COMPRESSION/REBOUND)
• FRONT CAMBER PLATES ARE INCLUDED ON ALL APPLICABLE KITS
• REAR CAMBER PLATES INCLUDED ON CERTAIN APPLICATIONS
• CUSTOM SPRING RATES AVAILABLE AS WELL AS A SWIFT SPRING UPGRADE (UPON REQUEST)
• 2 YEAR WARRANTY AGAINST MANUFACTURER DEFECT
• COMPLETELY REBUILDABLE AND INDIVIDUAL PARTS ARE AVAILABLE SEPARATELY FOR PURCHASE

SKU: C-18-DS-SPU-RE

DS Series BC Racing Coilover Kit

BC Racing's proprietary digressive piston (DS Series) design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. The biggest advantages of increased low-speed damping force to be in terms of what the driver "feels," i.e., roll, pitch, and quick weight transitions seen in chicanes and on Auto-X courses.

For the ultimate in driver feel - choose BC Racing DR Series Coilovers.

• General Specifications
• MONO-TUBE SHOCK DESIGN
• FULL HEIGHT ADUSTABILITY THROUGH THE SHOCK BODY (NOT SPRING)
• 30 LEVELS OF DAMPING ADJUSTMENT (COMPRESSION/REBOUND)
• FRONT CAMBER PLATES ARE INCLUDED ON ALL APPLICABLE KITS
• REAR CAMBER PLATES INCLUDED ON CERTAIN APPLICATIONS
• CUSTOM SPRING RATES AVAILABLE AS WELL AS A SWIFT SPRING UPGRADE (UPON REQUEST)
• 2 YEAR WARRANTY AGAINST MANUFACTURER DEFECT
• COMPLETELY REBUILDABLE AND INDIVIDUAL PARTS ARE AVAILABLE SEPARATELY FOR PURCHASE

SKU: C-18-RM

RM Series BC Racing Coilover Kit

BC Racing's inverted RM Series model includes all of the great features of the BR Series model, then takes everything up a notch. The inverted coilover system moves vital damper fluid away from detrimental heat sources to avoid overheating the fluid which can cause damper fade under extreme use. Inverted dampers handle high lateral loads more efficiently and offer increased durability under extended road course sessions. Other advantages are the reduction of unsprung weight by moving the majority of the coilover mass to the chassis of the vehicle where weight can be more easily shaved. This is a durable coilover setup for those looking to attack a road course, hill climb or tarmac rally.

• General Specifications
• INVERTED MONO-TUBE SHOCK DESIGN
• HEIGHT ADJUSTMENT VIA SHOCK BODY, NOT SPRING
• 30-CLICKS OF DAMPING ADJUSTMENT (COMPRESSION/REBOUND) SIMULTANEOUSLY
• FRONT CAMBER PLATES STANDARD ON APPLICABLE KITS
• REAR CAMBER PLATES STANDARD ON APPLICABLE KITS
• CUSTOM SPRING RATES AND SWIFT SPRINGS AVAILABLE FOR MOST APPLICATIONS
• CUSTOM VALVING AND/OR VALVING PAIRED FOR CUSTOM SPRING RATES
• 2 YEAR LIMITED WARRANTY AGAINST MANUFACTURER DEFECT
• FULLY REBUILDABLE WITH ALL PARTS AVAILABLE FOR PURCHASE

** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.

SKU: C-18-RM-RE

RM Series BC Racing Coilover Kit

BC Racing's inverted RM Series model includes all of the great features of the BR Series model, then takes everything up a notch. The inverted coilover system moves vital damper fluid away from detrimental heat sources to avoid overheating the fluid which can cause damper fade under extreme use. Inverted dampers handle high lateral loads more efficiently and offer increased durability under extended road course sessions. Other advantages are the reduction of unsprung weight by moving the majority of the coilover mass to the chassis of the vehicle where weight can be more easily shaved. This is a durable coilover setup for those looking to attack a road course, hill climb or tarmac rally.

• General Specifications
• INVERTED MONO-TUBE SHOCK DESIGN
• HEIGHT ADJUSTMENT VIA SHOCK BODY, NOT SPRING
• 30-CLICKS OF DAMPING ADJUSTMENT (COMPRESSION/REBOUND) SIMULTANEOUSLY
• FRONT CAMBER PLATES STANDARD ON APPLICABLE KITS
• REAR CAMBER PLATES STANDARD ON APPLICABLE KITS
• CUSTOM SPRING RATES AND SWIFT SPRINGS AVAILABLE FOR MOST APPLICATIONS
• CUSTOM VALVING AND/OR VALVING PAIRED FOR CUSTOM SPRING RATES
• 2 YEAR LIMITED WARRANTY AGAINST MANUFACTURER DEFECT
• FULLY REBUILDABLE WITH ALL PARTS AVAILABLE FOR PURCHASE

** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.

SKU: C-18-RM-SPU

RM Series BC Racing Coilover Kit

BC Racing's inverted RM Series model includes all of the great features of the BR Series model, then takes everything up a notch. The inverted coilover system moves vital damper fluid away from detrimental heat sources to avoid overheating the fluid which can cause damper fade under extreme use. Inverted dampers handle high lateral loads more efficiently and offer increased durability under extended road course sessions. Other advantages are the reduction of unsprung weight by moving the majority of the coilover mass to the chassis of the vehicle where weight can be more easily shaved. This is a durable coilover setup for those looking to attack a road course, hill climb or tarmac rally.

• General Specifications
• INVERTED MONO-TUBE SHOCK DESIGN
• HEIGHT ADJUSTMENT VIA SHOCK BODY, NOT SPRING
• 30-CLICKS OF DAMPING ADJUSTMENT (COMPRESSION/REBOUND) SIMULTANEOUSLY
• FRONT CAMBER PLATES STANDARD ON APPLICABLE KITS
• REAR CAMBER PLATES STANDARD ON APPLICABLE KITS
• CUSTOM SPRING RATES AND SWIFT SPRINGS AVAILABLE FOR MOST APPLICATIONS
• CUSTOM VALVING AND/OR VALVING PAIRED FOR CUSTOM SPRING RATES
• 2 YEAR LIMITED WARRANTY AGAINST MANUFACTURER DEFECT
• FULLY REBUILDABLE WITH ALL PARTS AVAILABLE FOR PURCHASE

** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.

SKU: C-18-RM-SPU-RE

RM Series BC Racing Coilover Kit

BC Racing's inverted RM Series model includes all of the great features of the BR Series model, then takes everything up a notch. The inverted coilover system moves vital damper fluid away from detrimental heat sources to avoid overheating the fluid which can cause damper fade under extreme use. Inverted dampers handle high lateral loads more efficiently and offer increased durability under extended road course sessions. Other advantages are the reduction of unsprung weight by moving the majority of the coilover mass to the chassis of the vehicle where weight can be more easily shaved. This is a durable coilover setup for those looking to attack a road course, hill climb or tarmac rally.

• General Specifications
• INVERTED MONO-TUBE SHOCK DESIGN
• HEIGHT ADJUSTMENT VIA SHOCK BODY, NOT SPRING
• 30-CLICKS OF DAMPING ADJUSTMENT (COMPRESSION/REBOUND) SIMULTANEOUSLY
• FRONT CAMBER PLATES STANDARD ON APPLICABLE KITS
• REAR CAMBER PLATES STANDARD ON APPLICABLE KITS
• CUSTOM SPRING RATES AND SWIFT SPRINGS AVAILABLE FOR MOST APPLICATIONS
• CUSTOM VALVING AND/OR VALVING PAIRED FOR CUSTOM SPRING RATES
• 2 YEAR LIMITED WARRANTY AGAINST MANUFACTURER DEFECT
• FULLY REBUILDABLE WITH ALL PARTS AVAILABLE FOR PURCHASE

** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.

SKU: C-18-ER

ER Series BC Racing Coilover Kit

The BC Racing ER Series features large external reservoirs front and rear, independently adjustable rebound and compression, plus a mono-tube twin-piston design. The large external reservoirs allow for a higher oil capacity that translates to faster heat dissipation during extended road course use. Additionally, the external reservoirs house the secondary piston, which allows for the independent adjustment of compression, separate from rebound adjustment. The ER Series coilover is the perfect system for the driver who wants to dial in his or her suspension by varying the compression and rebound settings to fit a specific driving style and performance demand.

• General Specifications
• MONO-TUBE DAMPER WITH TWIN PISTON DESIGN
• HEIGHT ADJUSTMENT VIA SHOCK BODY, NOT SPRING
• 30-CLICKS OF DAMPING ADJUSTMENT (COMPRESSION/REBOUND) SIMULTANEOUSLY
• FRONT CAMBER PLATES STANDARD ON APPLICABLE KITS
• REAR CAMBER PLATES STANDARD ON APPLICABLE KITS
• CUSTOM VALVED TO MATCH THE DRIVERS REQUESTED SPRING RATES
• SWIFT SPRING UPGRADE AVAILABLE ON MOST APPLICATIONS
• 2 YEAR LIMITED WARRANTY AGAINST MANUFACTURER DEFECT
• FULLY REBUILDABLE WITH ALL PARTS AVAILABLE FOR PURCHASE

** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.

SKU: C-18-ER-RE

ER Series BC Racing Coilover Kit

The BC Racing ER Series features large external reservoirs front and rear, independently adjustable rebound and compression, plus a mono-tube twin-piston design. The large external reservoirs allow for a higher oil capacity that translates to faster heat dissipation during extended road course use. Additionally, the external reservoirs house the secondary piston, which allows for the independent adjustment of compression, separate from rebound adjustment. The ER Series coilover is the perfect system for the driver who wants to dial in his or her suspension by varying the compression and rebound settings to fit a specific driving style and performance demand.

• General Specifications
• MONO-TUBE DAMPER WITH TWIN PISTON DESIGN
• HEIGHT ADJUSTMENT VIA SHOCK BODY, NOT SPRING
• 30-CLICKS OF DAMPING ADJUSTMENT (COMPRESSION/REBOUND) SIMULTANEOUSLY
• FRONT CAMBER PLATES STANDARD ON APPLICABLE KITS
• REAR CAMBER PLATES STANDARD ON APPLICABLE KITS
• CUSTOM VALVED TO MATCH THE DRIVERS REQUESTED SPRING RATES
• SWIFT SPRING UPGRADE AVAILABLE ON MOST APPLICATIONS
• 2 YEAR LIMITED WARRANTY AGAINST MANUFACTURER DEFECT
• FULLY REBUILDABLE WITH ALL PARTS AVAILABLE FOR PURCHASE

** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.

SKU: C-18-ER-SPU

ER Series BC Racing Coilover Kit

The BC Racing ER Series features large external reservoirs front and rear, independently adjustable rebound and compression, plus a mono-tube twin-piston design. The large external reservoirs allow for a higher oil capacity that translates to faster heat dissipation during extended road course use. Additionally, the external reservoirs house the secondary piston, which allows for the independent adjustment of compression, separate from rebound adjustment. The ER Series coilover is the perfect system for the driver who wants to dial in his or her suspension by varying the compression and rebound settings to fit a specific driving style and performance demand.

• General Specifications
• MONO-TUBE DAMPER WITH TWIN PISTON DESIGN
• HEIGHT ADJUSTMENT VIA SHOCK BODY, NOT SPRING
• 30-CLICKS OF DAMPING ADJUSTMENT (COMPRESSION/REBOUND) SIMULTANEOUSLY
• FRONT CAMBER PLATES STANDARD ON APPLICABLE KITS
• REAR CAMBER PLATES STANDARD ON APPLICABLE KITS
• CUSTOM VALVED TO MATCH THE DRIVERS REQUESTED SPRING RATES
• SWIFT SPRING UPGRADE AVAILABLE ON MOST APPLICATIONS
• 2 YEAR LIMITED WARRANTY AGAINST MANUFACTURER DEFECT
• FULLY REBUILDABLE WITH ALL PARTS AVAILABLE FOR PURCHASE

** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.

SKU: C-18-ER-SPU-RE

ER Series BC Racing Coilover Kit

The BC Racing ER Series features large external reservoirs front and rear, independently adjustable rebound and compression, plus a mono-tube twin-piston design. The large external reservoirs allow for a higher oil capacity that translates to faster heat dissipation during extended road course use. Additionally, the external reservoirs house the secondary piston, which allows for the independent adjustment of compression, separate from rebound adjustment. The ER Series coilover is the perfect system for the driver who wants to dial in his or her suspension by varying the compression and rebound settings to fit a specific driving style and performance demand.

• General Specifications
• MONO-TUBE DAMPER WITH TWIN PISTON DESIGN
• HEIGHT ADJUSTMENT VIA SHOCK BODY, NOT SPRING
• 30-CLICKS OF DAMPING ADJUSTMENT (COMPRESSION/REBOUND) SIMULTANEOUSLY
• FRONT CAMBER PLATES STANDARD ON APPLICABLE KITS
• REAR CAMBER PLATES STANDARD ON APPLICABLE KITS
• CUSTOM VALVED TO MATCH THE DRIVERS REQUESTED SPRING RATES
• SWIFT SPRING UPGRADE AVAILABLE ON MOST APPLICATIONS
• 2 YEAR LIMITED WARRANTY AGAINST MANUFACTURER DEFECT
• FULLY REBUILDABLE WITH ALL PARTS AVAILABLE FOR PURCHASE

** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.